How to Use A Router as a Wireless Adapter

ddwrt-image1There may come a time where you have an extra wireless router on your hands (such as the Linksys WRT54GL) that you’re not sure what to do with.  One thing that I have recently found useful is to use the router as a wireless adapter to connect to a wireless network.

Using a router as a wireless adapter will not only provide you with wireless connectivity, but will also give you a multiple-port switch to connect your wired devices.  This is a great way to allow multiple devices to have network connectivity without needing a wireless network card for each device.

  1. Start by checking if you router supports a 3rd party firmware.  (For this guide, I will be using the free DD-WRT firmware).
  2. Download and install the firmware according to the instructions for your router model.
  3. Enter http://192.168.1.1 into your browser and login using the default credentials, which is typically a blank username and the password admin.
  4. Click Wireless.
  5. Change Wireless Mode to Client.
  6. In Wireless Network Name (SSID), enter the name of the wireless network you would like the router to connect to.
  7. Click Apply Settings.
  8. Click Wireless Security (If the wireless network you are connecting to doesn’t have security enabled, you can skip this step.)
  9. Select the corresponding Security Mode and enter the network key and click Apply Settings.
  10. In the top right corner of the web interface, your router should now get a WAN IP that is provided by the wireless network.
  11. Click Setup and then select Basic Setup.
  12. Change the Local IP Address of your router to something other than the default, such as 192.168.5.1.  This is done to prevent conflicts with your existing network.
  13. Enter the Gateway of your wireless network.  (You can find your Gateway information under Default Gateway by entering ipconfig in the command prompt on a computer already connected to your wireless network.
  14. Optional: Click Setup and select Basic Setup.  Under WAN Port, check the box to Assign WAN Port to Switch.  This will add the WAN port to the 4 port switch, giving you 5 ports to share the wireless connection.

Once the above steps have been completed, your router with DD-WRT firmware will be connected to your wireless network as a client just as if you connected to the same wireless network with a laptop.  Any devices that are connected to the 4/5 port switch will now have network connectivity as well.


Posted

in

, ,

by

Comments

33 responses to “How to Use A Router as a Wireless Adapter”

  1. […] How to Use A Router as a Wireless Adapter | Techerator […]

  2. Evan Wondrasek Avatar

    Excellent guide – this is perfect for media centers (my TV, Blu Ray player, and Xbox all have ethernet ports now). Xbox 360 users should definitely check this out, it can easily save you $100 on Microsoft's wireless adapter.

  3. Evan Wondrasek Avatar

    Excellent guide – this is perfect for media centers (my TV, Blu Ray player, and Xbox all have ethernet ports now). Xbox 360 users should definitely check this out, it can easily save you $100 on Microsoft's wireless adapter.

  4. Jacob_K Avatar

    nice guide. there is a way to set up a router in bridge mode to connect 2 wireless routers. works good for gaming systems and video streaming if you use wireless N router bridge. helps with not having a router that doesn't support 3rd party applications.

  5. Jacob_K Avatar

    nice guide. there is a way to set up a router in bridge mode to connect 2 wireless routers. works good for gaming systems and video streaming if you use wireless N router bridge. helps with not having a router that doesn't support 3rd party applications.

  6. Matthewbrown Avatar
    Matthewbrown

    This is a great article but you need to remember that the ssid is case sensitive when entering it into the router

  7. Matthewbrown Avatar
    Matthewbrown

    This is a great article but you need to remember that the ssid is case sensitive when entering it into the router

  8. W3lshm3n Avatar
    W3lshm3n

    it all works fine on the router but still can't get a connection

  9. Rags_06 Avatar
    Rags_06

    This doesn’t quiet answer my question on how to make my external HD available to be modified from other wireless computers. How would one do that?

  10. […] a previous article I showed you how it is possible to use a wireless router and 3rd party firmware as a wireless adapter.  While the information in that guide is still relevant to most users, the steps provided create a […]

  11. Frankay Avatar
    Frankay

    As soon as i hit apply after changing “ap” to “client” it disconnects me from the routerand doesn’t let me make any more changes It goes into a cannot load page. I need help with this part.

    1. Steven Avatar
      Steven

      How can fix that?

  12. thanks man Avatar
    thanks man

    Damn genius!

  13. Jakobud Avatar
    Jakobud

    Should have chosen Tomato, considering that DD-WRT is pretty much not in development anymore and it has a lot of broken features (like QOS doesn’t work at all, etc).

    1. Evan Wondrasek Avatar

      Unfortunately, Tomato’s development also appears to have been effectively abandoned, as the last update was over 3 years ago. However, many forked versions of Tomato have been created to try to keep it current, but has also caused much fragmentation.

      https://en.wikipedia.org/wiki/Tomato_%28firmware%29#Feature_comparison

  14. Matt Avatar
    Matt

    Terrifically helpful! Thank you!

  15. RaymondRicks Avatar
    RaymondRicks

    Really an excellent guide. I was able to turn an old Virgin Media DLink DIR-615 into a wireless hotspot/adaptor and saved on running ethernet cables upstairs and also saved on buying a Sky adaptor for my second Sky box. Took me about 45 minutes to get it up and running and now my son can have a decent connection upstairs as well. Thanks for sharing!

  16. John Dirk Cañete Avatar
    John Dirk Cañete

    Got the smart tv connected to the internet in just 5mins thank you for the guide 😀

  17. Heracleus Avatar
    Heracleus

    Perfect solution for otherwise useless router and cheap substitute for expensive Wi-Fi adapters, thank you for sharing

  18. pranish shrestha Avatar
    pranish shrestha

    would I be able to use my router normally afterwards? I mean using a router like a router

    1. Albert Tso Avatar
      Albert Tso

      Just redo configuration setup to AP mode instead of Client.

  19. Siddharth Jain Avatar
    Siddharth Jain

    I have dlink dsl-2730u router it is compatible with ddwrt but I am not able to find the download link for firmware please help !!!

  20. 99webmail-Gmail Help Avatar

    Amazing article, Really its very helpful to me.. This is really nice place to get help for how to use a router as a wireless adapter..
    for easy articles help for it click at http://www.99webmail.com/

  21. Contact Customer Email Support Avatar
    Contact Customer Email Support

    Very nice article, Really its amazing and very helpful to me.. Great place to get help for how to use a router as a wireless adapter..
    for easy articles help for it click at http://www.atlasnumberdir.com/icloud-technical-support.html

  22. Quick email support Avatar

    if you are finding brother printer customer service helpline, connect experts of brother printer and fix all errors. http://www.quicktechbook.com/brother-printer.html

  23. Mike Wilson Avatar
    Mike Wilson

    Contact AOL Email Support team for technical help our AOL customer service team available 24/7.
    For more info visit :- http://customer-technical-support.com/aol-customer-support/

  24. Angel Smith Avatar

    Nice Article. Loved reading it

  25. Anna Smith Avatar
    Anna Smith

    Very informative blog thanks for sharing
    Read more:
    http://www.customer-service-tollfree.com/

  26. cane wiliamsane Avatar
    cane wiliamsane

    Pretty helpful material, much thanks for this article Digital Media Agency Karachi

  27. cane wiliamsane Avatar
    cane wiliamsane

    Amazing article thanks or sharing.. Marketing Assignment Help Service

  28. rock rozer Avatar

    AOL Customer Support 1-844-804-3954 toll free technical resolution we are provide such a good service.if you have any kind of problem-related Aol Account.we are resolve your issue and we will happy to assist you so you contact aol customer support
    https://www.call-customersupport.com/aol/

  29. TheCrestlineKid Avatar

    Brilliant, I always wondered if you could use a old router instead of buying a new adapter.

  30. Layla Phillips Avatar
    Layla Phillips

    Thank you for this informative blog…If your system is not working properly because of virus and you need antivirus Support then you are at right place, We at Triumph PC Care provides the best Avast Antivirus Support.So call on our Toll-free number 1-888-701-0007 . http://www.triumphpccare.com/support-for-avast-antivirus/

Leave a Reply to Jacob_K Cancel reply